Slate Roofing in Bridgehampton, NY

Roughly four to five times as much up front, and often less per year. Natural slate runs about $2,000–3,500 per square installed (national 2026) against $530–795 for architectural asphalt on Long Island. On a 30-square roof that is $60,000–105,000 for slate versus $15,900–23,850 for asphalt. Slate lasts 75–200 years (hard slate commonly 125–200); asphalt 20–30. Divide and slate is frequently the cheaper roof per year of service, if the framing can carry it and you will own the house long enough to care. Synthetic slate splits the difference at $1,155–1,890 per square and 40–50+ years.

There is no single answer, but there is a short list. Standing seam in aluminum or copper handles wind best and shrugs off salt (40–70+ years for aluminum, 70–100+ for copper). Natural slate lasts 75–200 years and resists wind once properly hung, with copper fasteners. Cedar is the traditional choice and works if it is fastened for wind and maintained on schedule, at the short end of its 20–40 years. Architectural and designer asphalt is the budget option, with some designer lines wind-rated to 130 mph. Whatever the covering, the details decide it: full ice-and-water shield, stainless or copper metal.

Sometimes. New York's Residential Code (R908.3) allows a roof recover only over a single existing layer, never over two or more, never over slate, clay, cement or asbestos tile, and never on a water-soaked or rotted deck. If your roof qualifies, an overlay is typically 20–40% cheaper than a tear-off (about 25% in a common example) but lasts 15–20 years instead of 25–30, and you cannot add ice-and-water shield to the deck. It makes sense on a sound single-layer asphalt roof you will sell within 10–15 years; on the oceanfront it rarely does.